ChippersShredders
HackBlitz 350
The HackBlitz 350 can chop branches and shrub twigs up to a diameter of 5cm effortlessly. The material is chopped by two chopping knives mounted on a chopping disk. The counter cutting edge is easy to adjust and produces first-class shredding results.
The feeding hopper's specially designed angle of inclination and the specific cutting geometry ensure that branches are drawn into the shredder and chopped quickly and smoothly. Chopped material can be collected in a wheelbarrow. The inclination of the ejector flap is adjustable. Mobile on two solid rubber wheels, diam. 250mm.
Article no.
Type
Description
M4505
350-E4
Driven by a 4kW 400 V electric motor, CEE-plug 16 A, protective motor switch phase inverter, no voltage releasing magnet; weight: 101kg
M4520
350-Z
Driven by tractor, universal-joint shaft required, max. power consumption 20 HP (max. 15kW),
three point suspension cat.1 and cat. 0,weight:103 kg
M4530
350-B5,5
Driven by a 5.5kW (7.5 HP) Briggs & Stratton
Vanguard four-stroke petrol-engine, hand-starter, weight: 103 kg.
Please note: 4kW S1 100% operating time corresponds to 5.5 kW S6 60% operating time!

   
Accessories parts and spare parts for "HackBlitz 350"
Article no.
Description
Z2000634 Universal-joint shaft Waltersceid 280Nm (Overload clutch)
F0001465 Chopping knives set (2 pieces) with four bolts.

HackBlitz 500

The HackBlitz 500 chops branches, waste wood, etc  up to a diameter of 10cm effortlessly. The material is chopped by two chopping knives mounted on a chopping disk Æ 500mm. The counter cutting edge is easy to adjust and produces first-class shredding results.

The feeding hopper’s specially designed angle of inclination and the specific cutting geometry ensure that branches are drawn into the shredder and chopped quickly and smoothly. The chopped material is ejected via the ejection flap at a height of 2.2m
Article no.
Type
Description
M4600
500/100
Z-H-D
Driven by tractor, universal-joint shaft required, max. power consumption 40-50HP (max. 30-37kW),
three point suspension cat.1 and cat. 0,weight:290kg
M4520
500/100
Z-W-D
as M4600 but with hydraulically operated top feeding roller
(forward and reverse motion), weight: 40kg
  
Accessories parts and spare parts for "HackBlitz 500"
Article no.
Description
Z2000630
Universal-joint shaft Bondioli max. 900 Nm (Overload clutch)
Z2000660
Universal-joint shaft Walterscheid max. 900 Nm (Overload clutch)
F0001516
Chopping knives set (2 pieces) with six bolts
F0001483
Ejector extension 500mm ( for wooden mateerial)
F0001515
Retrofit kit to change from M4600 to M4605
(without assembly!) (as of machine no.141)

Hackblitz 600
mit pto, petrol or diesel engine drive
There is chopping and then there is chopping! Those who know the HackBlitz 600 know what we mean - there is no other machine that chops faster. Professional equip0ment for professionals.

The new GackBlitz 600 is the successful further development of its predecessors. Its enormous power is most convincing. The Hackblitz 600 shreds earth-free material such as wood, branches, bushes and garden waste up to a diameter of 12cm within a matter of seconds.

The material to be chopped is drawn in through the funnel by two htdraulically driven intake rollers. The rollers run parallel to the chopping disk so that jamming of end pieces is avoided. The adjustable intake speed ensures optimum performance and rational work. The 2.6cm high swivel ejector ejects the chopped material where you want it. Driven by tractor via power take-pff shaft or petrol engine.

Technical features:

Chopping disk:
Chopping disk speed: approx 1750 rpm
The advantages
at a glance:
Extraordinarily high chopping performance
Easy access to chopping disk for rational maintenance
2.60 m high swivel ejector
2 hydraulically driven intake rollers
Power take-off shaft & petrol or diesel engine
Large funnel throat for convenience
CE and GS - tested safety!
Chopping disk diameter (mm): 600mm
Chopping disk width: 30mm
Chopping knife freely adjustable
Chopping length: 5-12mmMost simple opeartion
Intake funnel:
Intake funnel with tiltable funnel part
Intake opening ( w x h): 205 x 120mm
2 hydraulically driven intake rollers with linear adjustment and large roller diameter: 150mm
Funnel discharge height: 690 mm
Funnel throat (w x h): 820 x 810mm
safety switch bar with hydraulic control
Ejection:
Angle of blower adjustment 360°
Silencing casing
Available as accessories
Posch Control - elecktronische
Posch Control - electronic intake control
Tractor chassis
 
HackBlitz 600 PTO model in transport position
HackBlitz 600 petrol model with chassis
Hackblitz 600
Chopping disk 600 Ø 30mm. V-belt clutch for low-wear starting; overriding clutch for after-running of disk
Article no.
Type
Description
M4700
600/120
Z-D
Driven by tractor, three-point suspension cat 1 and cat. 2, universal-joint shaft required, pto speed 540 rpm, power consumption 25 - 30kW (34-40 PS), weight 550kg, dimensions: 2319 (1980 in transport position) x 1125 x 2670 (1 x w x h)
M4705
600/120
B18-S-LN
Driven by 18kW Honda petrol engine GX670 with electric starter, V-belt coupling for low-wear starting, overunning clutch for after-running of the disk, large 30 1 petrol tank, chassis for 80km/h, overrunning brake and lights, Weight 750-800kg, Dimensions: 3640 (3310 in transport position) x 1305 x 2670 mm (1 x w x h)
M4710
600/120
D19-S-LN
Driven by 19kW (26 PS) Lombardini diesel engine with electric starter, V-belt coupling for low-wear starting, overunning clutch for after-running of the disk, large 30 1 petrol tank, chassis for 80km/h, overrunning brake and lights, Weight approx: 900kg, Dimensions: 3640 (3310 in transport position) x 1455 x 2670 mm (1 x w x h)
Accessories
Article no.
Description
T
Tractor chassis with DIN drawbar lug (for M4700)
E
Electronic Posch Control intake control;
highly recommended with combination m4705 and M4710
H
Height-adjustable drawbar with ball coupling (for M4705) or DIN tow-bar lug
Z200 0643
Universal -joint shaft without friction clutch
Z200 0666
Universal-joint shaft with friction clutch, 1400 Nm
F000 1697
Set of hopping knives (2 pieces)
SO160
Homologation/type approval
SO455
2 hydraulic support stands instead of covered support
Powerful Honda 2-cylinder GX670 petrol engine with electric starter. We recommend Posch Control for electronic intake control as an option.
Convenient, foldaway food funnel, 820 x 810mm with an intake opening of 205 x 120mm
Hackblitz 600: The ejector can be folded and tilted
 
Shred Worker 100
What to do with cut-off shrubbery, bushes and branches? Tou will want to put them into the universal shredders and crushers of Posch! The ShredWorker 100 and the Chip Worker 150 set new standards in waste shredding.

The ShredWorker is able to shred organic material such as bushes, shrubbery, barks up to a diameter of 10cm ( draw-in opening 30 x 10cm). a draw-in conveyor bely brings the material to the hammer mill, where 36 rotating mallets (which can be used twice) crush it on the beating arm. by "Posch-Control" there is always a constant mallet-drum speed (electronically controlled).
The spring-loaded draw-in conveyor belt guarantees a constant feed of the shredding material. The draw-in speed can be adjusted from 0 to 0.4m/s.
The chopped material will be ejected via an
ejection flap in a height of 2.7m, that can be adjusted variably
Conveyor belt in a height of 2.3m
 
Article no.
Type
Description
M3400

350/100
PZG
Driven by tractor,universal-joint shaft required, power consumption approx. 37kW (50HP), three point linkage cat.2, weight;680kg
M34205
350/100
D35
Driven by a noise -reduced 35kW (|48 HP) Hatz-diesel engine,
electric starter and 30 l fuel tank.
Transportation on high-speed axle with overrunning brake,
max. 80 km/h, Weight: approx. 1600kg
M34215
350/100
D29
Driven by 29kW (39,5HP) Lombardini diesel engine with electric starter and 30l fuel tank. Transportation on high-speed axle with overrunning brake, max. 80 km/h, Weight: approx. 1450kg
Machines with conveyor belt
Article no.
Type
Description
M3440S

350/80
E11+FB
Driven by 22kW (15HP) electric motor 400V, cEE-plug 32A.
Conveyor belt instead of the ejection flap. Advantage: Less power consumption for the ejection. Transportation on high speed axle with overrunning brake, max. 80km/h, lighting equipment.
M3445S
350/80
B20+FB
Driven by a 14.7kW (HP)
Briggs&Stratton Vanguard 4-stroke-petrol engine, electric starter.
Conveyor belt instead of the ejection flap. Advantage: Less power consumption for the ejection. transportation on high speed axle with overrunning brake, max. 80 km/h, lihjting equipment, weight:1105kg
 
For transportation of machines with automotive or tractor chassis on public roads, the national highway coded must be observed!
Article no.
Description
H
Surcharge for height adjustable DIN-lug
.
Q
Surcharge, if the machine stands across
to the direction of motion (only for pto)
V
Chassis narrow
max width of chassis 1800mm, motor mounted in front
C
(Compact)
Reduction of price for feeding-in roll instead of
lower feeding-in chain, weight reduction: approx.50kg
SO263
Reduction of price without Posch-Control

Special equipment for ShredWorker
Article no.
Description
F000 1474
Mallet set (36 mallets)
F000 1475

Complete set of mallet (mallets, axles, distances, washer)
F400 1066
Mallet drum, pre-mounted
Profi-Shredder 300K1
The professional equipment for waste shredding and compost preparation. State-of-the-art technology for mobile application. The 300 K1 chops organic material such as bushes, shrubbery, bark, wreaths and garden and sawmill waste (wood with a diameter up to 5cm) A draw-in conveyor belt transports the material towards the hammer mill, where it is crushed by 27 rotating mallets.

The spring-loaded draw-in conveyor belt with overload coupling ensures continuous feeding of the shredding material. Machines driven by electric motor with protective motor switch, phase inverter and no-voltage releasing magnet as standard equipment. Please note! Universal-joint shaft must be ordered separately! Three point suspension bar cat. I standard. Please note! For machines with automotive or tractor engine the national highway code must be observed.

 
 
Article no.
Type
Description
M3200
300K1
Z-D
Driven by tractor, three-point linkage, universal-joint shaft required
power consumption 7 kW (9.5HP), weight:198kg
M3280
300K1
ZE4-D
One machine - two possible drives:
Driven by tractor, three point linkage
universal-joint shaft required
Driven by a 4kW 400 V electric motor, CEE-plug 16A
M3231

300K1
E4-H

Driven by 4 kW 400 V electric motor, CEE-plug 16A ,
Mobile on two solid rubber wheels Æ 300 mm, weight: 164kg
M3232
LN
300K1
ZE4-D
as above, but mobile on axle with ball-shaped coupling, lights
M3251
300K1
E5-5-H
Driven by 5.5kW 400 V electric motor, CEE-plug 16A ,
Mobile on two solid rubber wheels Æ 300 mm, weight: 192kg
M3252
LN
300K1
E5-5-S
 as above, but mobile on axle with ball-shaped coupling, lights
M3261
300K1
B8-H
Driven by 8kW (11HP) Broggs&Stratton
Vanguard four-stroke petrol-engine, handstarter.
Mobile on two solid rubber wheels Æ 300 mm, weight: 172kg
M3262
LN
300K1
B8-S
as described above, but mobile on axle with ball-shaped coupling,
lights, weight: 214kg
M3271
300K1
B8 ST-H
 Driven by 8kW (11HP) Broggs&Stratton
Vanguard four-stroke petrol-engine, E-starter,.
Mobile on two solid rubber wheels Æ 300 mm, weight: 198kg
M3272
LN
300K1
B8- ST-S
as described above, but mobile on axle with ball-shaped coupling,
lights, weight: 236kg

Accessory parts for "Professional Shredder 300K1"
Article no.
Description
Z2000585
Universal-joint shaft Bondioli with overload clutch
Z2000638
Universal-joint shaft Walterscheid with overload clutch
F0002179
Hour counter for machines with electric motor drive
F001368
Hour counter for machines with PTO or PTO/electric drive
F001482
Hour counter for machines with petrol-engine drive
   
Special equipment for "Profi-Hucksler 300K1
Article no.
Description
F0001467
Set of mallets with cutting edge (|complete with axles and spacers)
Advantages: Better shredding result, noise reduction, less power required.
S
Surcharge
for mallets with cutting edge instead of standard mallets
SO160
Type homologation
 
ChipWorker 150
The ChipWorker is able to chop organic material such as bushes, shrubbery. barks up to a diameter of 15cm (draw-in opening 30 x 15cm). A draw-in conveyor belt brings the material to the chopping drum. The material is chopped by three chopping knives which are mounted on a chopping drum Ø 350mm. The chopping knives are easy to adjust to achieve optimum shredding results. By virtue of the Posch Control" the chopping drum speed is always kept constant (electronically controlled).

The spring-loaded draw-in conveyor belt guarantees a constant feed of the shredding material. The draw-in speed can be adjusted from 0 to 0.4m/s.

The chopped material is ejected via an
ejection flap in a height of 2.7m, that can be adjusted variably
  or
a conveyor belt in a height of 2.3m.
Article no.
Type
Description
M3450
350/150
PZG
Driven by tractor, universal-joint shaft required, power consumption approx.37kW (50HP),three point linkage cat.2. Weight approx. 700kg
M3470S
350/150
D35
Driven by a noise-reduced 35kW
(48 HP) Hatz-diesel engine, electric starter and 30 l fuel tank.
Transportation on high-speed axle with overrunning brake, max. 80km/h. Weight: approx. 1600 kg
M3471S
350/150
D29
Driven by 29kW (39,5 HP) Lombardini diesel engine with electric starter and 30 l fuel tank. Transportaion on high-speed axle with overrunning brake, max.80 km/h. Weight: approx. 1450 kg.
  
Machines with conveyor belt
Article no.
Type
Description
M3490S

350/130
E11+FB
Driven by 11kW (15HP) electric motor 400V, CEE-plug 32A.
Conveyor belt instead of the ejection flap. Advantage: Less power consumption for the ejection. Transportation on high speed axle with overrunning brake, max. 80km/h, lighting equipment.
M3495S
350/130
B20+FB
Driven by a 14.7kW (HP) Briggs&Stratton Vanguard 4-stroke-petrol engine, electric starter.
Conveyor belt instead of the ejection flap. Advantage: Less power consumption for the ejection. Transportation on high speed axle with overrunning brake, max. 80 km/h, ligjting equipment, weight:1194kg
For transportation of machines with automotive or tractor chassis on public roads, the national highway coded must be observed!
 
Accessories for ChipWorker Note; Available only at initial delivery, incl. assembly
Article no.
Description
H
Surcharge for height adjustable DIN-lug
.
Q
Surcharge, if the machine stands across
to the direction of motion (only for pto)
V
Chassis narrow
max width of chassis 1800mm, motor mounted in front
C
(Compact)
Reduction of price for feeding-in roll instead of
lower feeding-in chain, weight reduction: approx.50kg
SO263
Reduction of price without Posch-Control

Spare parts for ChipWorker
Article no.
Description
F000 1473
Chopping knives set ( 3 pieces) with six bolts
.
F400 1068
Chopping drum, pre-mounted

Special - and accessory parts for Chip - and ShredWorker
Article no.
Description
Z200 0630
Bondioli universal-joint shaft with sliding clutch max.900Nm
Z200 0660
Universal-joint shaft walterscheid with sliding clutch max. 900 Nm
SO144
Lighting equipment
SO164
Type approval
 
  Tel: 01556 612233
Jas P Wilson
Forest machines