|
|
|
|
|
|
| |
More
rational sawing. What would modern
firewood preparation look like without
powerful saws with integrated conveyor
belt - such as the Cutmaster 700
or the new, fully automatic AutoCut
700 by Posch. For decades, Posch
has been among the leading developers
and manufacturers of circular saws
for professional use. Faster, more
efficient, safer. The new AutoCut
700 pays more tribute to this slogan.
The new fully automatic saw cuts
timber in 2 second cycles and achieves
an hourly output of up to 8 stacked
cubic metres. Posch firewood saws
are outstanding not only for their
power, but also for their safety,
easy operation and sturdiness. Investments
in Posch saws are investments for
years. Invertments that pay off.
|
| CutMaster
700
|
|
Firewood
cutting has never been faster
or more efficient. The CutMaster
700 is the ideal partner when
it comes to firewood processing.
The CutMaster 700 is an extremely
sturdy powerful tilting circular
saw for firewood cutting, with
integrated hydraulically driven
conceyor in three different
lengths.
Thanks to the telescopic design
of the conveyor belts, transportation
height can be kept low. The
hydraulically controlled
tiliting table facilitates effortless
feeding of timber to the saw
blade.
With the special,
hard metal saw blade Ø 700mm, firewood
billets up to a max. diameter
of 240mm can be cut. The large-scale
pto drive, the high-strength
V-belt drive and the hydraulically
driven conveyor guarantee extremely
long service life with little
maintenance requirements. Three-point
linkage with cat.I and II as
standard.
Note: Universal-joint shaft
must be ordered separately.
The
advantages
at a glance:
|
Smooth
running hydraulic
tilting system
|
Efficient
cutting and loading
|
Silent
hard-metal saw blade Ø 700mm
|
Long
service life - little
maintenance required
|
GS/CE
- tested safety
|
|
The
CutMaster 700 ensures fast and
safe preparation of firewood |
|
|
The
transport belt can be folded down
within no time |
The CutMaster 700
in transport position |
|
|
The mechanic stop
for infinitely variable adjustment
of cut-off length is easy to operate |
 |
Hydraulically
operated tilting unit - makes your
work less tiring |
After
cutting, the billet is automatically
thrown onto the belt |
| |
|
Article
no.
|
Type
|
Description
|
|
M1855
|
WZ-F35
|
Driven
by tractor, universal-joint
shaft required,conveyor
length 3.5m - ejection
height 2.4m, weight:
492kg |
|
M1856
|
WZ-F10
|
as
above, but conveyor length
1m - ejection height
1 m |
|
M1857
|
WZ-F42
|
as
above, but
with 4.2m - ejection
height 2.8m, weight 515kg |
|
M1858
|
WZ-F50
|
as
above, but with 5m conveyor
belt with stand, no transportation
on roads possible |
M1865 |
WE-F35 |
Driven by a 9kW 400V electric
motor, CEE-plug 32 A, conveyor
length 3.5m - ejection height
2.4m, weight: 560 kg |
M1866 |
WE9-F10 |
as above, but conveyor
length 1m - ejection height
1m, weight; 520kg |
M1867
|
WE9-F42
|
as
above, but conveyor length
4.2m - ejection height
2.8m, weight; 572kg |
M1868
|
WE9-F50
|
as
above, but conveyor length
5m -with support stand,
road transportation not
possible |
M1875 |
WZE9-F35 |
One machine - two possible
drives
*Driven by tractor, universal-joint
shaft required * Driven by
a 9kW 400V electric motor,
CEE-plug 32A,
weight: 570 kg, conveyor
length 3.5m - ejection height
2.4m |
M1876 |
WZE9-F10 |
as
above, but conveyor length
1m - ejection height 1m,
weight; 501kg |
M1877
|
WZE9-F42
|
as
above, but conveyor length
4.2m - ejection height
2.8m, weight; 590kg |
M1878
|
WZE9-F50
|
as
above, but conveyor length
5m - with support stand,
road transportation not
possible |
|
|
Accessories
and spare parts
for CutMaster 700
|
|
Article
no.
|
Description
|
Z130
0103
|
Alternative
special-hard metal
saw blade Ø 700mm
(84 teeth)
|
F000
2179
|
Hour
counter for machines
with electric motor
drive
|
F000
1484
|
Hour
counter for machines
with pto/electric drive
|
SO434
|
60cm
extension for tilting
sheet, with rollers. Note: Available
only at initial delivery.
|
Z200
0580
|
Bondioli
universal-joint shaft
|
Z200
0635
|
Walterscheid
universal-joint shaft
|
|
|
|
|
|
More
rational sawing. What would modern
firewood preparation look like without
powerful saws with integrated conveyor
belt - such as the Cutmaster 700
or the new, fully automatic AutoCut
700 by Posch. For decades, Posch
has been among the leading developers
and manufacturers of circular saws
for professional use. Faster, more
efficient, safer.
The new AutoCut
700 pays more tribute to this slogan.
The new fully automatic saw cuts
timber in 2 second cycles and achieves
an hourly output of up to 8 stacked
cubic metres. Posch firewood saws
are outstanding not only for their
power, but also for their safety,
easy operation and sturdiness. Investments
in Posch saws are investments for
years. Invertments that pay off.
|
| AutoCut
700
|
|
The
future of firewood preparation
has begun.
With the AutoCut 700, a
fully automatic firewood
saw, cutting has gone professional!
The integral tractor chassis
makes quick relocation
without cumbersome refitting
possible, whick makes the
AutoCut 700 a profitable
investment also for timber
preparation communities.
The Autocut 700: A patented
innovation by Posch
The Posch AutoCut 700 sets
new standards in firewood
preparation. Reflecting
decades of experience,
commitment and patented
solutions. Developed by
professionals. For professionals.
One man, one machine
It takes only one person
to operate the new AutoCut
700. All the operator has
to do by hand is put the
135cm long and up to 24
cm thick timber into the
cutting trough. The rest
is done by the Posch AutoCut700
all by itself. A fully
automatic timber advancing
device moves the timber
towards the cutting unit.
from 20 to 50cm, the cutting
length is infinitely adjustable.
When the timber has reached
the correct cutting position,
it is automatically secured.
After cutting, the next
piece of wood in the cutting
trough can move forward,
while a belt takes tthe
cut billet to the loading
point; the belt can be
extended up to a height
of 3.40m.
Crystal clear and safe
The Autocut 700 from Posch
is an absoluteley safe,
automatic cutting solution.
the entire cutting area
is covered. When the cover
is removed thte system
stops automatically. All
controlling units are ergonomic
and clearly arranged. the
emergency-stop switch is
located next to the control.
|
The
Autocut 700 - a fully automatic
firewood saw! |
|
|
The
Autocut 700 in transport position |
A
single person can operate the Autocut
700 |
 |
|
Various
drives, such as pto and electric
motor, or combinations |
The
filling trough ensures simple
and safe advance of the material
to be cut |
|
|
The
automatic timber holder ensures
safe cutting |
Highly
flexible thanks to tractor
chassis |
 |
|
Fast and powerful
The
hourly output is Superior. Thanks
to the choice of various models,
such as stationary model or tractor
chassis model, the AutoCut is also
highly flexible, a real jack of all
trades among automatic firewood saws.
Facts that speak for themselves
And here are the highlights
that make the AutoCut 700 a top-of-the-range
machine:
|
Easy
access for setting and maintenance
work |
The belt is secured
for transportation |
 |
Cutting
in 2-second cycle |
|
Superior
hourly outputl |
|
Cuts
timber up to 135 cm length
and diameters of 24cm in
billets from 20 to 52 cm
length |
|
WIDIA
700 saw blade standard |
|
Most
simple opeartion |
|
Safety
all round |
|
Automatic loading woth conveyor
belt |
|
Various models |
|
Flexible thanks to tractor
chassis |
|
Height of drawbar eye 700mm |
|
|
|
Cutting
length infinitely variable, 20
to 52cm. |
Changing the saw
blade is a matter of a few steps |
| |
Designed for
pros. built for pros. The new AutoCut by Posch. Easy operation
and handling, extremely high hourly output and its high degree
of flexibility make the autocut 700 tthe insider's secret that
ensures your competitive edge.
|
The
advantages
at a glance: |
Patented
cutting system |
Extremely
high hourly output up to 8cm3(st)/hr |
Unique
timber feeding system |
Safe
cutting thanks to securing of the timber |
2-second
cutting style |
Covered
cutting area |
Various
drive types |
GS/CE
- tested safety |
|
Article
no. |
Type |
Description |
M1955TF16 |
AC700-ZF16 |
Tractor
driven, universal-joint shaft required; pto speed 480 rpm;
power consumption approx. 20kW with tractor chassis and conveyor
belt 1.6m: weight: 1,300 kg |
M1955TF42 |
AC700-ZF42 |
Tractor
driven, universal-joint shaft required; pto speed 480 rpm;
power consumption approx. 20kW with tractor chassis and conveyor
belt 4.2m; weight: 1400 kg |
M1965F16 |
AC700-E9F16 |
Driven
by 9 kW electric motor, CEE plug, conveyor belt 1.6m;
standing type; weight: 1200kg |
M1965F42 |
AC700-E9F42 |
Driven
by 9 kW electric motor, CEE plug, conveyor belt 4.2m;
standing type; weight: 1300kg |
M1965TF16 |
AC700-E9F16 |
Driven
by 9 kW electric motor, CEE plug, conveyor belt 1.6m;
with tractor chassis weight; 1,350 kg |
M1965TF42 |
AC700-E9F42 |
Driven
by 9 kW electric motor, CEE plug, conveyor belt 4.2m;
with tractor chassis weight: 1450kg |
M1975TF16 |
AC700-ZE9F16 |
Tractor
driven , universal-joint shaft required; pto speed 480 rpm:
power consumption approx. 20kW and driven by 9kW electric
motor, CEE plug with tractor chassis and conveyor belt 1.6m;
weight; 1400kg |
M1975TF42 |
AC700-ZE9F42 |
Tractor
driven , universal-joint shaft required; pto speed 480 rpm:
power consumption approx. 20kW and driven by 9kW electric
motor, CEE plug with tractor chassis and conveyor belt 1.6m;
weight; 1400kg |
|
|
|
Article
no.
Special
equipment - Note:
Available only at
initial delivery
incl. assembly!
|
|
Article
no.
|
Description
|
F53
|
5.3m
conveyor belt instead
of 4.2m belt (surcharge)
|
TH
|
Hydraulically
adjustable tractor
chassis with fender,
brake and support wheel
instead of simple tractor
chassis
|
SO455
|
2
hydraulic stands in
the front instead of
de-coupling support
|
|
Accessories
for AutoCut
700
|
|
Article
no.
|
Description
|
Z130
0102
|
WIDIA
special hard metal
saw blade, diameter
700 mm (84 teeth)
|
F0001903
|
Hour
counter for machines
with electric
drive
|
F0001902
|
Hour
counter for machines
with pto/electric drive(Reed
contact)
|
Z2000600
|
Bondioli
universal-joint shaft
|
Z2000637
|
Walterscheid
universal-joint shaft
|
|
|
| |
 |
|
|
|
|
|
|
 |
|
 |
|
|
Tel: 01556 612233
|
Jas P Wilson
Forest machines
|
|
|
|
|
|
|
|
