Consideration for the wood has been an important ingredient when designing the Solid F9. The demand on forestry without damage to the wood requires highly specialized machines. With modern technical means in combination with experience gained during many years Solid F9 has been given the ideal qualities demanded of an effective thinning forwarder
The machine shall be considerate not only to the wood, but also to the driver and possess good economic prerequisites.
The Solid’s flexible transmission, eight wheels, small dimensions and low ground pressure create the necessary conditions for an undamaged and well growing stand also after the thinning.
Big image (58 KB):
Click on the product image to see a detailed photograph.
Therefore, it is obvious that a Solid F9 is the solution when it is time for thinning.
ENGINE
4 cylinder, water cooled turbo engine JOHN DEERE 4045 TF 250 and tandem-mounted hydralic pumps for working hydraulic and transmission built together to a compact unit. IQAN electronic control and regulating system.
Cylinder volume: 4,5 litres (274 in³)
Torque at 1400 rpm: 445 Nm (328 lb-ft)
Output at 2400 rpm: 93 kW (125 hp)
Fueltank: 140 litres (37 US.gal)
 
ELECTRIC SYSTEM
24 volt electric system with IQAN control and regulating system.

System voltage: 24 V
Alternator: 2 x 55 A
Battery: 2 x 89 Ah
Working light: 22 x 70 W

STEERING
Articulated steering joint of ball race type with double acting cylinders. Steering wheel control by orbitrol, proportionally controlled off-road steering.

Max. steering angle: ±43°
Max. steering torque: ±40,1 kNm

FRAMES
Welded puller frame with steering joint of ball race type and built-in steering cylinders. Stabilizer with cylinders integrated in front frame. Wagon with centre beam and tube bunks. Front bunk and front gate built together and hydraulically movable backwards 600 mm.

Loading area: 3,6 m²

CAB
Devibrated welded safety cab with damping materials in floor, walls and ceiling. Rear window and rear side windows of polycarbonate. Air suspended, electrically heated seat with waist belt. Air condition with automatic control type ACC and pollenfilter. Hydraulic running-board. Sound level below 75 dBA.
 
LOADER
RK 62 Knuckle boom loader with fixed tower. Swingbase with double slew cylinders. 1.4 m extension and endless rotator. Rottne grapple 28.

Lifting torque: 60 kNm
Torque: 17,5 kNm
Slewing arc: 350°
Outreach: 6.90 m

MEASURES, WEIGHT AND LOADING CAPACITY
Length: 8240 mm
Width: 2480 mm
Transport height: 3580 mm
Ground clearance: 580 mm (at steering joint) Distance gate-bogie centre: 2330 mm
Service weight: 10600-11500 kg (depending on equipment)
Loading capacity: 9000 kg
EQUIPMENTS
Standard:
Service equipment with technical documentation and complete set of tools. RDS radio. Fire extinguisher.
 
Extra:
Engine/cab preheater, heating coil for hydraulic tank, skylight window, sun visors. Sprinkler system, biodegradeable oil. Airvent seat, electronical filter indication, cyclone precleaner. Radio with CD.

POWER TRANSMISSION
IQAN controlled hydrostatic/mechanical with power control. 2 speed drop box with Power Shift and disengagable wagon drive. Geared bogies with manual differential lock. Speed, gear 1: 0-10 km/h Speed, gear 2: 0-25 km/h

BRAKES
2 circuit hydraulic wet disk brakes. Automatic parking and emergency brake

WHEEL EQUIPMENT
Front:
600/50 x 22,5/12*
700/40 x 22,5/12
Rear:
600/50 x 22,5/12*
700/40 x 22,5/12
*) Standard

HYDRAULIC SYSTEM
The machine has two completely separated systems. One for the transmission and one for the working hydraulics. Working hydraulics: Load sensing constant pressure system with filters in return line and leak line. Extra fine filter circuit (3 my) with waterseparation. Tandem mounted hydraulic pump. Valves L90LS.

Pump capacity: 150 liters/1500 rpm
Working pressure: 3-20
Mpa Filtering degree: 10 my abs
Tank volume: 80 litres
We reserve for us the right to make changes in specifications and equipment
. The illustrations do not always show the machine as standard.
 
  Tel: 01556 612233
Jas P Wilson
Forest machines