ROTTNE 5005, NEW SINGLE GRIP HARVESTER FROM ROTTNE
1. John Deere 6068 engine with 185 Hp.
2. IQAN controlling system for loader and transmission.
3. New hydrostatic with dual pumps and pressure-controlled synchronisaton. Oil deviders and differential values for front and rear axle.
4. New strong parallel-acting loader, Rottne RK 140, which is easy and fast to operate due to good geometric characteristics.Equiped with 2M extension arm that provides a 10 metre outreach.
Big image (61 KB):
Click on the product image to see a detailed photograph.
5. New compact harvesting head, Rottne EGS 550, with dual pair of delimbing knifes separately operated. Dual diameter sensors for more exact measurements. Load-sensing hydraulic system. Automatic chain tensioning.
6. Completely new measuring and monitoring system, Rottne D4 in a Windows environment. A Can Bus connects the electronic components.
ENGINE
6-cylinder water-cooled turbo engine JOHN DEERE 6068 TF 250 and hydraulic pumps for working hydraulics and transmission built into a compact unit. All steering and control through electronic control system.

Torque at 1400 rpm: 656 Nm (485 lbf ft)
Output at 2400 rpm: 138 kW (185 Hp)
Fuel tank: 425 litres (112 US gal)
 
ELECTRIC SYSTEM
IQAN control and monotoring system. The machine is fitted with a 24 volt electrical system. Variable adjustable working speed via potentiometer.
System voltage: 24V
Alternator: 2 x 55 A
Battery: 2 x 115 Ah
Working light: 17 x 70 W

STEERING
Hydraulically controlled, articulated steering joint, with double steering cylinders.

Max steering angle: +/- 42°
Max steering torque: 31,3 kNm (23100 lbf ft)

FRAMES
Fully welded center frames with built-in tank in the front frame part. Automatic level control through hydraulically controlled casted wheel arms. The machine has automatic stabilizing lock.

Tilting angle lengthwise: +/- 19°
Tilting angle sideways: +/- 31°
Ground clearance: 200-1400 mm (8-55 in)

CAB
Rubber mounted welded safety cab with damping materials in floor, walls and ceiling. Polycarbonate windows. Air suspended electrically heated seat. Sound level below 72 dBA. One of the largest cabs on the market.

LOADER
Parallel-acting knuckle boom loader with tiltable loader base. Unloaded revolving house with 700 mm ball race and double slewing cylinders.

RG 140:
Tilting angle loader base: +/-15° Lifting capacity: 150 kNm (110 600 lbf ft) Torque: 32 kNm (23 600 lbf ft) Slewing arc: 275° Outreach: 10 m (33 ft)
 
 
HEAD
EGS 550B
Pendulum suspended with flange mounting in rotator. Delimbing unit with stem glasping knives. The feeding device is fitted with hydraulic motors which are mounted in inclining wheel arms. Support rollers in the feeding track of the head.

Saw diameter: 550 mm (22 in)
Delimbing diameter: 50-450 mm (2-18 in)
Feeding force: 18 kN (4100 lbf)
Weight: 900 kg (1990 lb)

MEASURING AND MONITORING SYSTEM
Rottne D4:

Micro-computer based monitoring and cross-cutting system in a PC environment . System components are connected using a CanBus. Information can be saved using floppy disks, hard discs, modems, or portable computers.

WEIGHT
Service weight (excluding harvester. unit): 13000 - 14000 kg (28 700-30 900 lb)

EQUIPMENTS
Standard:
Hand fire extinguisher. Service equipment with technical documentation and complete tool kit. Tool and accessory box. Kleenoil filter. Pollen filter. RDS radio.

Extra: Engine and cab preheater, tank/battery heating coil, extra wipers and washers. Sun visors. Anti skid device. Radio with CD player, sprinkler system. Vacuum pump, environmental oil.

POWER TRANSMISSION
Fully hydrostatic with two variable pressure-steered pumps, one installed in each axle. Two-speed drop gearbox in each wheel offering a 2 gear step ratio. Electronic control system for transmission and levelling. Oil deviders and diff lock in both direction of travel. The hydraulic system for the transmission is fully separated with tank and filter.

Traction: 125 kN (28100 lbf)
Speed [L]: 0-10 km/h (0-6 mph)
Speed [H]: 0-20 km/h (0-12 mph)


BRAKES
Brakes on all wheels through the transmission hydraulics. Parking brake and emergency brake through spring loaded wet disk brakes in the wheel motors.

WHEEL EQUIPMENT


Front/rear:
600/65 x 34 (standard)

Alt
700/55 x 34; 23,1 x 34; 700/70 x 34

HYDRAULIC SYSTEM
The machine has two fully separated systems. One for the transmission and one for the working hydraulics. Working hydraulics: Hydraulic pump mounted in a pumpdrive.

Pumpcapacity at engine speed 1700 rpm: 265 l/1700 rpm (70 US gal/min)
Working pressure: 24 Mpa (3600 psi)
Filtering degree: 10 my abs (10 micron)
Tank volume: 120 liters (32 US gal)
We reserve for us the right to make changes in specifications and equipment
. The illustrations do not always show the machine as standard.
 
  Tel: 01556 612233
Jas P Wilson
Forest machines